flexiblefullpage - default
Currently Reading

Better R-Values With Blown-in Insulation

billboard - default
Quality Matters

Better R-Values With Blown-in Insulation

There’s a strong case to be made for blown-in fiberglass insulation: It can help homes achieve a great effective R-value

By Richard Baker October 2, 2017
Installing blown-in fiberglass insulation
The case for blown-in fiberglass rests on energy ratings (Photo: Courtesy IBACOS)

The vast majority of production builders use batt insulation in the walls of the homes they construct, but there’s a strong case to be made for blown fiberglass. This is especially true for builders working under the 2015 energy code, which requires that homes be evaluated according to RESNET’s Home Energy Rating System (HERS). 

Blown insulation makes it much easier to earn a Grade 1 HERS rating. That’s because insulation can only achieve its nominal R-value when it fills all framing cavities, including hard-to-reach and sometimes hidden gaps and voids. However, we rarely see a home with batt insulation that doesn’t fall short. That’s because installers tend not to take enough time to carefully cut and fit batts around wires, pipes, and other obstructions, and they often don’t get enough insulation into those hard-to-reach spots. 

Many builders are already using blown insulation for the ceiling plane between the conditioned space and an unconditioned attic. In homes with complex rooflines, the attic will likely have a lot of hard-to-reach areas, but even the simplest attic will include recessed lights, exhaust fans, electrical wiring, and other obstructions that are difficult to insulate around. Blown fiberglass has proven faster and more effective than traditional batts in the attic, so why not consider it for the walls as well?

With blown fiberglass, a skilled installer can easily fill in voids and around obstructions. And while material costs tend to be slightly higher than with batts, the fact that you can insulate more houses in a day and achieve a consistent level of performance can make installed costs comparable. There are also increased benefits from an acoustical perspective, due to the uniform and increased density of a quality application.

Blown-in Insulation: Take Care During Installation 

That said, blown insulation isn’t a panacea. For instance, while filling all voids reduces air leakage, fiberglass won’t completely stop it. In other words, you should use the same air-sealing protocols for blown-in fiberglass as you use with batts. It’s also crucial to choose an experienced installer. Fiberglass blowing fiber is blown through a hose attached to a blowing machine. It is blown through netting attached to the studs. 

It’s possible to degrade performance by not using properly calibrated equipment, but a skilled installer will know how to adjust the equipment to deliver the full R-value and must follow all manufacturer recommendations on equipment and installation practices. This will ensure that the insulation flows around all obstructions.

How to Address Common Blown-in Insulation Installation Issues 

While a quality batt installation is not impossible, the captions and photos below illustrate some common issues associated with poor-quality batt insulation that can easily be addressed by a quality netted and blown insulation job.

Deep wall framing, such as a transition from 2x4 to 2x6 wall framing, requires a thicker batt to ensure it fully fills the cavity—something that is still overlooked by some builders.

Electrical boxes obstruct the continuity of the insulation, and care must be taken to cut and fit insulation around and behind the box to ensure there are no gaps or voids. 

Pipes and wires can compress batt insulation causing voids in the cavity if care is not taken to cut and fit the insulation around these horizontal obstructions.

Odd-size cavities, such as in corners or the spaces adjacent to windows or partition walls, require batts to be expertly cut to size to ensure proper fit.

Inadequate v. adequate insulation, interior wall cavity

Inadequate insulation in a 2x6 wall cavity can be rectified with blown insulation.

Improper versus proper insulation fill around pipes, wires, electrical

Blown insulation ensures proper fill around pipes, wires, electrical boxes, and any other obstructions.

Odd-sized cavities, improperly and properly filled with insulation

Odd-size cavities can be insulated with consistency using blown insulation (all images courtesy IBACOS). 

Richard Baker is program manager of the Builder Solutions team at IBACOS.


Related Stories

Quality Matters

5 Ways Home Builders Can Maintain Quality Despite Supply Chain Issues

It’s OK to swap out building products, but not at the expense of your construction quality standards

Quality Matters

Builder Reputation Basics: One Make-or-Break Factor You Can't Miss

Since the first construction meeting lays the groundwork for a great relationship throughout the build, don’t sleep on the initial meeting between your site supervisor and new homeowners

National Housing Quality Award

National Housing Quality Award Winners and Profiles 1993–2023

An archive of NHQA-winning companies that represent home building's best in Total Quality Management

boombox1 -
native1 - default
halfpage2 -

More in Category

native2 - default
halfpage1 -

Create an account

By creating an account, you agree to Pro Builder's terms of service and privacy policy.

Daily Feed Newsletter

Get Pro Builder in your inbox

Each day, Pro Builder's editors assemble the latest breaking industry news, hottest trends, and most relevant research, delivered to your inbox.

Save the stories you care about

Lorem ipsum dolor sit amet lorem ipsum dolor sit amet lorem ipsum dolor sit amet.

The bookmark icon allows you to save any story to your account to read it later
Tap it once to save, and tap it again to unsave

It looks like you’re using an ad-blocker!

Pro Builder is an advertisting supported site and we noticed you have ad-blocking enabled in your browser. There are two ways you can keep reading:

Disable your ad-blocker
Disable now
Subscribe to Pro Builder
Already a member? Sign in
Become a Member

Subscribe to Pro Builder for unlimited access

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.